Tankless Water Heater Repair Katy TX
Tankless Water Heater Repair Katy Troubleshooting
Normally, most of the issues that might take place with a tankless water heater, triggering it to require a repair are external elements. Right here are a few of them:
The venting is not right. The most typical mistake is using typical B-vent, which can rapidly ruin the heat exchanger due to acidic condensation.
Inspect the gas supply line. Occasionally the supply line is undersized and was simply attached to the existing line size. The size specified in the setup handbook requires to be utilized.
The gas pressure is not proper. The working pressure needs to be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, depending upon the design.
The incorrect kind of gas that is being made use of – natural gas or liquid propane. It is not possible to utilize the non-specified kind.
Water flow or temperature level change problems. There are a number of things we will inspect to see to it they are working effectively, like cleaning or changing the input filter, analyzing the check valve, inspecting the seals in the faucets and looking to see if there is a cross flow someplace that has to be dealt with.
Hard Water Problems: In locations where the water is extremely hard, de-scaling will be required regularly.
Environmental concerns. The heaters need to be set up in a clean location with access to combustion air that is devoid of dust, lint, grease, or chemicals.